Results for alloy steel: 46

Specification according to the Standard F 2282, establishes quality assurance requirements for the physical, mechanical, and metallurgical requirements for carbon and alloy steel wire, rods...

August 3 MetalBiz--Vietnam financial department previously issued the notice of No.93, intended to impose 10% tariffs on the imported alloy steel. Since this year, thousands tons...

The hot-rolling process has gradually become a much more closely controlled operation, and is being increasingly applied to low alloy steels with compositions carefully chosen to provide optimum ...

By far the largest tonnage of alloy steels is of the types containing generally 0.25 to 0.55% C, or less, and usually quenched and tempered for high strength and toughness. Manganese, silicon, nickel ...

Alloy steels may be divided into four classes: (1) Structural steels, which are subjected to stresses in machine parts ...

SEOUL, April 20 - South Korea, China's top overseas steel market, is concerned about rising exports of Chinese alloy steel products aimed at reducing tax burdens, as overseas demand falters on an economic slowdown, industry...

High-strength low-alloy (HSLA) steels, or microalloyed steels, are designed to provide better mechanical properties and/or greater resistance to atmospheric corrosion than conventional carbon ...

The solid-solution hardening of carbon has a major effect on the strength of martensite, but ductility can only be obtained at low carbon levels. Although alloying elements affect hardenability, they have ...

During the last fifty years engineers have demanded steels with higher and higher tensile strength, together with adequate ductility. This has been particularly so where lightness is desirable, as in the ...

Most clad metals are composites of a cladding metal such as stainless steel, nickel and nickel alloys, and copper and copper alloys welded to a backing material of either...